Cleaning Method Of Mixing Machine

After we use the mixing machine, we have to clean up the equipment to ensure flexibility in the next use. What are our cleaning methods at this time?

How to clean and maintain the paddle agitator equipment; usually the upper end of the deflector is lower than the hydrostatic level, and there is a hole or groove in the cylinder. When the liquid level drops, fluid can still enter the deflector from the hole or groove. Divided into two parts of equal area, the diameter of the deflector is about 70% of the diameter of the container. When the paddle stirrer is placed under the deflector and the diameter of the container is larger, the diameter of the lower end of the deflector should be reduced. So that the lower opening is smaller than the diameter of the stirrer.

After each operation, the personnel of the paddle mixer equipment should sort out the maintenance items: sort the ash deposits inside and outside the mixing tank wall, the concrete residues on the discharge opening, the mixing shaft and the discharge door, and wash these places with water. If necessary, add a small amount of stones and water and mix for a few minutes before releasing. Wash the car, additive tank and its supply system with water. In the freezing season, the water pump, additive pump, water tank, additive tank, water, and residual water in the additive pipeline should be drained after the operation to prevent damage to the pump and its pipeline, and start the additive pump of the water pump. Homework 1-2 minutes. Check the maintenance items of the concrete mixer equipment weekly: whether the manual mixer oil pump needs to add smooth grease; smooth points are necessary for smooth operation; each smooth point is located on the discharge door shaft of the mixer, each storage hopper and weighing hopper door Shafts, belt conveyors, machine rollers, pressure rollers, rollers, bearings, transmission chains, upper and lower bearings of spiral shafts, and large gears of the host.