How does the operating environment affect the chiller?

Now let's see how the operating environment affects the chiller?

1. Installation environment of chiller.

The installation of chiller equipment caused some troubles. Air cooled chiller. Usually installed outdoors. If it is installed indoors, a certain distance shall be reserved from the surrounding equipment to prevent the operation failure of the chiller due to poor heat dissipation.

Therefore, the installation and operation of the chiller. It will have a great impact on production, so when installing the chiller, it should be properly differentiated according to the type of chiller.

For example, for air-cooled chillers, the chiller fan should be placed in an open environment as far as possible. For example, the distance between the air cooler and the wall should be one meter when it is placed outdoors.

2. Operation duration of chiller.

For continuous production enterprises, water chillers operate continuously. The environmental conditions of the chiller will have a great impact on the chiller. For example, the failure rate increases. If the chiller is not used frequently, the operating environment will not be affected.

Only the appropriate operating environment can ensure the long-term stable operation of the equipment, avoid the impact of various small problems, and reduce the cost of using water-cooled chillers in enterprises.

3. Environmental factors of chiller.

For example, in special workshops, explosion-proof water chillers should be set up in flammable and explosive areas to avoid affecting the use of water chillers due to circuit failures.

In the selection stage of electroplating chiller, should we pay attention to direct cooling or indirect cooling? Special treatment shall be made for the material of evaporator of chiller.

If there is no special treatment for the chiller due to the influence of the workshop production process, it will often cause the chiller operation failure, resulting in production losses.